Methods for investigating and testing materials
- Created by: gb2000
- Created on: 05-04-19 13:33
R | K | G | J | G | R | M | I | X | P | M | D | S | U | E | N | D | S | F | J |
X | K | Y | G | L | W | K | C | X | A | J | R | H | N | O | N | M | L | N | D |
Q | G | P | J | A | E | S | S | A | Q | E | C | I | N | H | U | E | O | T | C |
D | C | K | S | P | D | S | T | T | T | P | H | D | G | W | Y | I | B | A | N |
Y | W | U | Q | W | E | X | F | E | N | C | E | T | V | I | T | L | D | N | O |
S | I | M | I | N | L | O | M | V | A | S | X | H | R | A | E | I | O | M | F |
H | C | U | D | L | L | I | V | M | T | D | D | Y | V | M | M | I | Y | M | P |
U | P | R | H | O | T | P | G | R | Y | L | T | A | A | A | S | B | R | L | B |
F | A | A | T | L | U | N | U | A | H | I | F | B | R | O | P | E | V | E | J |
H | H | H | U | P | I | C | D | A | L | O | L | Y | R | S | T | E | D | Q | C |
G | C | M | W | D | T | R | I | I | Y | A | P | R | S | E | K | O | D | V | S |
J | V | V | N | I | Q | F | B | K | U | S | O | E | M | T | T | Q | D | E | I |
W | I | E | V | Q | I | A | M | G | R | C | N | O | Q | P | X | K | N | N | D |
I | B | E | K | B | E | F | L | E | J | H | S | I | U | D | N | W | J | X | V |
X | S | P | T | L | D | W | K | C | G | N | N | N | D | N | W | V | A | X | E |
W | D | Q | L | P | A | C | Y | U | E | Y | C | H | L | T | L | Q | T | O | G |
G | Y | A | P | O | I | Y | O | T | V | H | C | G | K | Q | F | S | G | K | V |
A | M | N | R | V | V | T | D | M | G | L | S | A | V | H | D | I | J | L | M |
P | I | M | K | S | W | F | Q | O | F | Q | C | G | H | G | R | Q | C | C | R |
R | B | T | S | R | W | X | X | B | T | H | B | D | F | J | L | T | U | R | B |
Clues
- Device used to test for electrical conductivity (10)
- I _______ can be used to indent a material to test for hardness (8)
- The hardness test beginnign with V where a diamond square based pyramid is used to indent the surface of a material (14)
- The machine used in industry to test the ductility and malleability of a material (14)
- The machine used in the industrial testing of tensile strength (10)
- The two ways to test this are abrasive wear and resistance to surface indentation (8)
- This test can be used to determine the rate of _______ for a material when exposed to environmental effects such as rain or sun (9)
- This test establishes how much impact force the material can absorb (9)
- What would this test for? Secure the test piece in a vice and try to bend the piece to 90 degrees (12)
- X-ray, Ultrasonic, Heat flow meters and the four point probe method are all examples of what type of testing (14)
Comments
No comments have yet been made