Tell me driving questions

?
Identify where you would check the engine oil level and tell me how you would check the engine has sufficient oil
remove the oil dipstick and wipe clean with a dry cloth. Put it back in and remove it, it needs to be between the min and max mark
1 of 10
identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level
Identify the coolant reservoir tank, it should be between the min and max marks. Before filling it, ensure the engine and radiator have cooled to avoid danger of scolding
2 of 10
identify the brake fluid reservoir and tell me how you would check you have a safe level of hydraulic brake fluid
identify the brake fluid reservoir, i needs to be between min and max. Take to a mechanic if it needs topping up regularly
3 of 10
Identify the windscreen washer reservoir and tell me how you would check the windscreen washer level
Identify the windscreen washer reservoir, it should be up to the neck of the bottle
4 of 10
tell me where you would find information for the recommended tyre pressure and how tyre pressure should be checked
recommended pressures are given in the manufacturers guide. a reliable pressure gauge must be used, checking and adjusting the pressures when the tyres are cold, remember to refit the cap
5 of 10
tell me how you would check the tyres to ensure that they have sufficient tread depth and that they are roadworthy
can use a gauge to check tread depth. Depth should be at least 1.6mm across the central 3/4 of the tyre, around the entire circumference. Visual inspection for cuts or bulges
6 of 10
tell me how you would check that the brakes are working before starting a journey
press your foot on the brake pedal. They should feel firm and not spongey or slack. test just after moving off, they should stop the car without pulling to one side, if not get checked by mechanic
7 of 10
tell me how you would check that the headlights and taillights are working (no need to exit the vehicle)
operate the headlights switch (turn ignition on if necessary) then walk around the vehicle (tell me question so no need to do it)
8 of 10
tell me how you would make sure that your head restraint is correctly adjusted so it provides to best protection in the event of a crash
the rigid part of the head restraint should be at least as high as the eyes or top of the ears. and as close to the back of the head as is comfortable.
9 of 10
tell me how you would know if there was a problem with your anti-lock braking system
a warning light on the dashboard should illuminate if there is a fault with the ABS. You would need to take the car to a mechanic.
10 of 10

Other cards in this set

Card 2

Front

identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level

Back

Identify the coolant reservoir tank, it should be between the min and max marks. Before filling it, ensure the engine and radiator have cooled to avoid danger of scolding

Card 3

Front

identify the brake fluid reservoir and tell me how you would check you have a safe level of hydraulic brake fluid

Back

Preview of the front of card 3

Card 4

Front

Identify the windscreen washer reservoir and tell me how you would check the windscreen washer level

Back

Preview of the front of card 4

Card 5

Front

tell me where you would find information for the recommended tyre pressure and how tyre pressure should be checked

Back

Preview of the front of card 5
View more cards

Comments

No comments have yet been made

Similar Other resources:

See all Other resources »See all Driving test tell me questions resources »