G485

?
Coulomb’s Law
The force between two electric charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.
1 of 9
Electric Field Strength
Force per unit positive charge
2 of 9
Magnetic Flux Density
A measure of the strength of a magnetic field, defined by:    where B = magnetic flux density (T), I = current in the wire (A), l = length of the wire (m), F = the force experienced (N) and θ = the angle between the wire and the field.
3 of 9
Tesla
The unit of magnetic flux density, when a wire of length 1m carrying a current of 1A perpendicular to the field experiences a force of 1N.
4 of 9
Magnetic Flux
The product of magnetic flux density, B and the projection of area, A onto a surface at right angles to the flux. Unit = Weber
5 of 9
Weber
- One Weber is the unit of magnetic flux when a magnetic field of magnetic flux density 1 Tesla, passes at right angles through an area of 1m2 .
6 of 9
the product of the magnetic flux and the number of turns on the coil. Unit = Weber turns.
7 of 9
The magnitude of the induced e.m.f. is equal to the rate at which magnetic flux is cut. For a coil this becomes: The induced e.m.f. is equal to the rate of change of flux linkage.
8 of 9
Lenz’s Law
The direction of the induced e.m.f. is such that it opposes the change causing it.
9 of 9

Other cards in this set

Card 2

Front

Force per unit positive charge

Back

Electric Field Strength

Card 3

Front

A measure of the strength of a magnetic field, defined by:    where B = magnetic flux density (T), I = current in the wire (A), l = length of the wire (m), F = the force experienced (N) and θ = the angle between the wire and the field.

Card 4

Front

The unit of magnetic flux density, when a wire of length 1m carrying a current of 1A perpendicular to the field experiences a force of 1N.

Card 5

Front

The product of magnetic flux density, B and the projection of area, A onto a surface at right angles to the flux. Unit = Weber