show me tell me questions

?
Open the bonnet, identify where you would check the engine oil level and tell me how you would check that the engine has sufficent oil.
Identify dipstick/oil level indicator, describe how to check the oil level against min/max markers.
1 of 19
Show me how you would check that the power assisted steering is working before starting a journey. If the steering becomes heavy the system may not be working properly.
Before starting a journey, make 2 checks. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticable movement. Alternatively turning the steering wheel just after moving off will indicate.
2 of 19
Open the bonnet, identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.
Identify high/low level markings on header tank where fitted or radiator filler cap and describe how to top up to correct level.
3 of 19
Show me how you would check the parking brake (handbrake) for excessive wear.
Demonstrate by applying handbrake so that when it is fully applied it secures itself, and is not at the end of the working travel. (Keep control using footbrake firmly).
4 of 19
Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level.
Identify the resevoir and explain how to check level.
5 of 19
Show me how you would check that the horn is working.
Check is carried out by using control (turn on ignition if necessary).
6 of 19
Open bonnet, identify where the brake fluid resevoir is and tell me how you would check that you have a safe level of hydraulic brake fluid.
Identify resevoir, check level against high/low markings.
7 of 19
Show me how you would check that the direction indicators are working.
Applying the indicators or hazard warning switch and check functioning of all indicators (you may need to switch on the ignition).
8 of 19
Show me how you would check that the brake lights are working on this car (examiner can assist you).
Operate brake pedal, make use of reflections in windows, garage doors, etc. or ask someone to help (switch ignition on but do not actually start the engine).
9 of 19
Tell me how you would check that the brakes are working before starting a journey.
Brakes should not be spongey or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.
10 of 19
Tell me how you would check that the headlights and taillights are working (no need to exit vehicle).
Operate switch (turn on ignition if necessary), then walk round vehicle.
11 of 19
Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.
Check the manufactuer's guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don't forget spare tyre, remember to refit valve caps.
12 of 19
Tell me how you would check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.
No cuts and bulges, 1.6mm of tread depth across the central 3/4 of the breath of the tyre and around the entire outer circumference.
13 of 19
Show me how you would clean the windscreen using the windscreen washer and wipers.
Operate control to wash and wipe windscreen (turn ignition on if necessary).
14 of 19
Show me how you would set the demister controls to clear all the windows effectively, this should include both front and rear screens.
Set all relevant controls including: fan, temperature, air direction (engine does not have to be turned on for this).
15 of 19
Show me how you would switch on the rear fog lights and explain when you would use them (no need to exit vehicle).
Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use (when visibility is below 100m).
16 of 19
Show me how you switch your headlight from dipped to main beam and explain how you would know the main beam is on whilst inside the car.
Operate switch (with ignition or engine on if necessary), check with main beam warning light.
17 of 19
Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash.
The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears and as close to the back of the head as is comfortable.
18 of 19
Tell me how you would know if there was a problem with you anti lock braking system (ABS).
Warning light should illuminate if there is a fault with the anti lock braking system (ABS).
19 of 19

Other cards in this set

Card 2

Front

Show me how you would check that the power assisted steering is working before starting a journey. If the steering becomes heavy the system may not be working properly.

Back

Before starting a journey, make 2 checks. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticable movement. Alternatively turning the steering wheel just after moving off will indicate.

Card 3

Front

Open the bonnet, identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.

Back

Preview of the front of card 3

Card 4

Front

Show me how you would check the parking brake (handbrake) for excessive wear.

Back

Preview of the front of card 4

Card 5

Front

Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level.

Back

Preview of the front of card 5
View more cards

Comments

No comments have yet been made

Similar All resources:

See all All resources »See all practical driving resources »