Music Technology Definitions 0.0 / 5 ? Music TechnologyCompressor A2/A-levelEdexcel Created by: FloDCreated on: 01-06-18 12:12 Compressor Reduces dynamic range 1 of 10 gain reduction the amount of compression applied as the audio plays 2 of 10 attack the amount of time it takes for the compressor to react when the signal exceeds the threshold 3 of 10 release the amount of time it takes for the compressor to stop reducing the signal (once the signal falls below the threshold) 4 of 10 ratio the ratio by which the signal is reduced when it exceeds the threshold 5 of 10 knee adjusts whether the signal is compressed immediately or more gradually at levels close to the threshold 6 of 10 threshold the level above which the signal is reduced 7 of 10 peak peak makes the compressor react to the signal when it goes over the threshold no matter how short a time 8 of 10 RMS RMS takes an average of the signal over time 9 of 10 gain volume increase applied to the output signal 10 of 10
Describe the different techniques and technologies that have been used to apply reverberation to recordings from the 1920s to today. 5.0 / 5 based on 1 rating
Comments
No comments have yet been made