Music Tech Terminology 0.0 / 5 ? Music TechnologyTerminologyASOCR Created by: GeorgeGreenCreated on: 24-05-16 10:12 What is a LPF? All frequencies below cut off can pass through 1 of 18 What is a HPF? All frequencies above cut off can pass through 2 of 18 What is a Band Pass Filter? Comibnation fo HPF/LPF (freq. not effect by either cut off) 3 of 18 What is a Notch Filter? Used to cut specific frequencies, extreme band pass 4 of 18 What is a Shelving Filter? e.g. tine controls on hifis and guitar amps 5 of 18 What is MIDI? An electronic language that sends information to digital instruments what to play and how to play it 6 of 18 What does MIDI stand for? Musical Intrument Digital Interface 7 of 18 Name 3 types of microphone Dynamic, Condenser & PZM 8 of 18 Difference between active and passive DI box's? Active: Need phantom power, Passive: Don't need phantom power. 9 of 18 Two microphone positioning terms Close/Distant & Single/Pair 10 of 18 Explain Chorus Sound detuned & delayed by around 40 ms. Makes teh sound appear thicker & richer. 11 of 18 Explain Delay Sound stored & played back after a length of time ('echo') 12 of 18 Explain Phasing Combines two copies of the same sound with the second. 13 of 18 What is Flanging? Slightly delayed, giving a 'swirling' effect. 14 of 18 What is the order of prossesing? Noise Gate > Compressor > EQ 15 of 18 What is the threshold? Where the compressor 'kicks in' 16 of 18 What is the ratio? How much signal is compressed (i.e the gain reduced) 17 of 18 What is attack/release? Speed at which the compressor kicks in and lets go of the audio signal 18 of 18
Comments
No comments have yet been made