DT Electronics

HideShow resource information
  • Created by: AryanPro
  • Created on: 26-05-14 12:10
What are the three legs of the transistor called?
Emitter, Base, Collector
1 of 9
Which leg on the transistor needs 0.6v or more to activate which leg do we apply 0.6v
Base
2 of 9
Why do we need a diode in the SHG
So if the battery is connected the wrong way the circuit won't blow (short circuit)
3 of 9
Why do we need a transistor in SHG
It amplifies the sound
4 of 9
What does ROM stand for
Read Only Memory
5 of 9
What does dedicated chip mean
It only does one thing
6 of 9
What is a Jig
A jig is a type of custom-made tool used to control the location and/or motion of another tool e.g. template for vacuum forming
7 of 9
Why do we need to use flux when brazing or sliver soldering
So the solder conducts electricity well
8 of 9
How to test to see if the fire bricks are hot or not
hover you hand over it to feel the heat
9 of 9

Other cards in this set

Card 2

Front

Which leg on the transistor needs 0.6v or more to activate which leg do we apply 0.6v

Back

Base

Card 3

Front

Why do we need a diode in the SHG

Back

Preview of the front of card 3

Card 4

Front

Why do we need a transistor in SHG

Back

Preview of the front of card 4

Card 5

Front

What does ROM stand for

Back

Preview of the front of card 5
View more cards

Comments

No comments have yet been made

Similar Design & Technology: Electronics resources:

See all Design & Technology: Electronics resources »See all SHG resources »