Show me, Tell me questions (practical Driving Test)

• NOT feel spongy or slack
• should be TESTED as you set off
• Vehicle should NOT pull to one side

• found in the MANUFACTURES GUIDE
• use a reliable pressure gauge (gage)
• 
• check tyre pressure when it's cold
• ALWAYS have a spear tyre
• REMEMBER to refit valve caps
• 

• head restraint must be REGID part is at least as high as the eye or top of the ears
• 
• must be close to the back of the head

• NO cuts or bulges
• 1.6mm tread depth across the central three-quarters of the breadth of the tyre, and around the entire circumference of the tyre
• 

• explain you would operate the switch
• walk around the vehicle
• you would explain this NOt demonstrate as it's a tell me question
• sidelights symbol
• 

• A warning light will appear

• EXPLAIN you would operate the switch
• walk around the vehicle to check

• EXPLAIN you operate the brake pedal
• make use of reflections in windows or door or ask someone to help

• if the steering becomes HEAVY
• BEFORE starting a journey x2 checks
• 1. gentle pressure on the steering wheel, maintained while the engine is started = should result in is a slight but noticeable movement the system begins to operate.
• 2. turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.

• operate a switch, check with main beam warning light

• identify a dipstick check oil level against the minimum and maximum marker
• check with a dipstick, when the car is on a flat surface, the engine is cold, pull the dipstick out, wipe with a clean cloth, put it back in and check the maximum and minimum marker.
• 

• identify high and low-level markings on the header tank or radiator fitted cap
• describe how to top to the correct level
• https://www.youtube.com/watch?v=F3RQoMw_I-c
• 

• identify the reservoir
• check levels against a high and low markings

https://www.youtube.com/watch?v=Wd9owxBMafg